Rotate Reference
You can access this tool from the following:
Also used to rotate references using a fence and to rotate references selected from the References dialog list.
When working with a read-only file such as an i-model, you can use this tool and you can view its impact on the original drawing but the changes will not be saved.
Setting | Description |
---|---|
Method | Sets the method by which the reference is rotated. |
X | Angle to rotate the reference about the x axis for 3D files. |
Y | Angle to rotate the reference about the y axis for 3D files. |
Z | Angle to rotate the reference about the z axis for both 2D and 3D files. |
Move Boundary with Reference | If on, any clipping boundary and/or clipping mask(s) is rotated with the reference. If off, only the reference is rotated, with any clipping boundary and/or clipping mask(s) remaining as is. |
Use Reference Dialog List | If on, the model(s) selected in the References dialog is rotated. (Not available) All options regarding references are controlled through the Model tab of the Project Explorer dialog. |
Use Fence | If on, the fence contents are rotated. The option menu sets the Fence (Selection) Mode. |